POSITION PURPOSE
To support the Broll onsite team in performing day to day task as to required performance levels where Broll is responsible for electrical systems. Ensure that such systems perform as designed and intended in order that the building electrical and electronic systems operate in a reliable and cost-effective way.
Ensure site electrical-related policies, procedures, work processes, safety guidelines, and programs are compliant with all pertinent codes and requirements.
ESSENTIAL FUNCTIONS AND BASIC DUTIES OF THE POSTION

Responsible for maintaining all systems that are owned by Kimberly-Clark downstream from the utility providers’ meter (point of coupling).
Provide support during electrical system shutdown on an as-needed basis. Support for Kimberly-Clark related projects that require connection to Kimberly-Clark electrical system(s). Typical work will include, but not be limited to building distribution systems, transformers, switches, panels, and breakers.
Over time or weekend work will be required as and when the working schedule so requires. Also required to perform or assist with handyman work when required to eliminate backlog or stand over work.
 Deliver planned & reactive maintenance service covering electrical.
 Implement equipment service specifications in accordance with the required standards.
 Install & commission electrical equipment in accordance to specification.
 Conduct maintenance on electrical reticulation and equipment as per schedule, preventative or emergency fault rectification.
 Perform inspection of elctrical installation, identify areas of risk & report back for rectification.
 Ensure that preventative or emergency fault rectification complies with the relevant legislation and service level agreement.
 Maintain, repair and service electrical items as per in scope.
 Ensure quality of work and timeous completion of all requests.
 Provide constant feedback to the Site Lead & the client on all requests.
 Capture all job or work instruction detail to the Broll platform or on a Job card.
 Ensure all admin work are completed with all detail and as soon as the job or task is completed.
 Verify the job information with the supporting staff to ensure the correct information are required for the office support staff to complete the task and invoice.
 Ensure that all work is are left clean and neat after the completion of any task.
 Verify with the client on completion of the task that the client is satisfied and that the work was done to satisfaction.
 Report any unsafe conditions and follow up on the conclusion.
 Do all tool checks on a regular basis and ensure the check reports are filed to support the safe operations of power tools and ladders.
 Perform routine items,
 Inspections
 SAPS
 PAT testing
 Lighting audits
 COC verifications
 Obtain vendor quotes for approval
 Contractor management
 Administration
 HSE Admin
 LOTTO procedures
 Test for dead
 Cleaning and maintaining all electrical boards and rooms

Electrical assets include, but are not limited to:

Building Utility and Distribution Systems
Primary Power Systems (Power Feeds, Substations, Switchgear owned by Kimberly-Clark)
Secondary Power Systems (Switch gear, motor control centers, motor starters, disconnects, panel boards, circuit breakers, transformers, computer distribution units, wiring, devices, receptacles, etc.)
Site Distribution Systems (Wiring, Conduits, and wall/floor outlets, modular furniture wiring, etc.)
Lighting Systems (Panel boards, circuit breakers, transformers, lighting relays and controls, infrared and ultrasonic sensors, lighting dimmer controls, light fixtures, ballast, lamps, wiring, switches and dimmers, etc.)
Emergency Power Systems (Emergency Generators, UPS systems, panels, batteries, and control cards)
Electrical Systems & Equipment (Variable Frequency Drives (VFDs), Electric Motors and Fans (including VAV units), Electrical buzzers/alarms, Electromagnetic door locks, Lightning Protection Equipment
Building Indoor and Outdoor Lighting
Maintenance of electrical panels
Electrical System Maintenance
 Ensure accuracy of all panel schedules and equipment labeling (e.g., arc labels)
 Test circuits, locate, diagnose, and repair faults
 Maintain, clean, and replace components as required
 Maintain conduits, raceways and interstitial spaces in orderly condition
 Repair, replace and adjust electric heat tracing, as needed
 Perform Infrared testing annually or as required by Kimberly-Clark
 Maintain, repair and replace electric leak detection systems and components
 Inspect and repair VFDs of all sizes and capacities
 Provide qualified on-call electrician services to promptly restore lost power or remedy any problems that may create a safety or security hazard. (e.g., Burning smell, critical asset or area lighting outage, all other outages)
Major Maintenance and Refurbishing of Electrical Systems
 Support the planning and implementation of major maintenance projects
 Maintain and analyze reliability histories to support project requests
Uninterrupted (or Uninterruptable) Power Supply (UPS)
 Responsible for monitoring UPS equipment operation
 Manage maintenance of the batteries, transfer switches, wiring, devices, and accessories
 Ensure all systems are maintained as recommended by the manufacturer or Kimberly-Clark-approved requirements
 Coordinate maintenance timing with users to minimize potential impact of power outage when UPS is off-line
Test, Repair and Maintain Emergency and Stand-By Power Generation
 Coordinate maintenance timing with Kimberly-Clarks to minimize potential impact of power outages when emergency power generating systems are off-line
 Regular test of power generating systems
 Monitor operation and loading when power generating systems are operating
 Always maintain optimum fuel capacity
 Replenish fuel supply as required and develop an emergency refueling plan
Replace All Lamps as Needed
 Replace lighting as per the SLA
 Recycle old lamps in accordance with recycling programs and site disposal guidelines
Maintain and Repair Indoor and Outdoor Lighting
 Maintain fixtures, lenses, ballasts, covers and associated components
 Remedy all hazards, shorts and flickering
 Repair or replace damaged or stained components as appropriate to service levels
 Test emergency, security and exit lights; replace low batteries
 Adjust and reset lighting controls (including timers, motion sensors, etc.) as required
Utility Equipment Operations and Maintenance
 Operate utilities in an efficient, cost effective and reliable manner aligned with energy conservation goals. Systems include but are not limited to: Chillers, Cooling Towers, Compressed Air Equipment, Vacuum Equipment, Hot water heaters/systems, Pumps, Bulk Tanks, Heat Exchangers, DI Water Systems
 Repair and maintain utilities: Remedy all outages
 Repair and maintain utilities: Remedy all hazards or malfunctions
 Properly maintain Main power stations including but not limited to high voltage switch gears and breakers, transformers, and all related components (examples: 15kV feeders and transformers, meters, etc.)

PERFORMANCE MEASUREMENTS

 The SLA with our client will be used as a measurement of performance as well as the feedback on assessments from management and reporting structures.
 Must conduct himself in a professional manner, conduct and relationship soundness based on client feedback in KPI assessments.

EDUCATION/CERTIFICATION:

Grade 12
Must have electrical trade test and up to date wireman’s license
Driver’s license

REQUIRED KNOWLEDGE:

Must have computer skills, know IT management systems, reporting, and meeting

EXPERIENCE REQUIRED:

Minimum 5 years of experience, preferably in a similar role

SKILLS/ABILITIES:

Well organized and detail oriented.
Good attention to detail and accuracy.
Cooperative and willing to assist others.
Excellent Communication Skills
Administration Skills
Dependable
Computer Skills
Flexible
Good Interpersonal Skills
Able to use PC, calculator, and other basic business machines.

go to method of application »

Use the link(s) below to apply on company website.