Qualifications

Grade 12 with Maths
Code 10 would be an added advantage
Blasting Assistant Certificate
Entrance Medicals
Inhouse Training
Magazine Master Ticket (Desirable)

Experience

Previous experience in blasting / mining environment
2 years blasting assistant experience

Duties

To re-fill the truck at the loading points with the prescribed raw materials / products under the supervision of the Truck Operator. Assist the Truck Operator in conducting the prescribed pre-use inspections Prior to use of the truck
To perform cleanliness duties of the vehicle on an on-going basis so that it is presentable in the eye of the public
To perform housekeeping duties as instructed by the Foreman or other authority figure. This may include cleaning, sweeping of the site, silo areas and cleaning ablution facilities
To ensure Personal cleanliness at all times as per SHERQ requirement
To carry out an inspection of all the holes and measure them to ensure that they are drilled to the correct depth in cooperation with the Truck Operator
To report any out of spec holes, so that the truck operator While adhering to all the SHERQ standards and prescriptions, responsible for engaging the pumping process and loading the holes according to the design specs
To place the charging hose into the correct holes as per procedures
To ensure the detonator is not stuck at the bottom of the hole before charging commence
To ensure the detonator line is secured at the collar of the hole to eliminate the possibility of the detonator line falling into the hole
To act as a Spotter to guide and direct the Truck Operator on the blasting area as per procedures.To take samples as per procedures
To ensure the availability of sample cups on the truck
To assist operator to check final densities
To measure before delivering product down the hole
To check of final stemming
To ensure good condition and safe keeping of the measuring tape
To ensure that correct twine is used for not overcharging holes
To ensure that twine is in a good condition
To assist the truck operator with the calibration of the applicable raw materials on the truck
To assist the truck operator with the calibration of the twine, Samson sample scale and the measuring tape
To clean the calibration equipment and calibration area
To assist the truck operator with the grease of all movable parts on the truck chassis and plant
To assist the truck operator to clean all strainers on the truck.To assist the truck operator with all other mini maintenance like changing of tyres, rotors and stators.
To ensure that all SHERQ requirements are met

Application email or URL: http://omnia.erecruit.co